With the demand for smart cities and environmental protection, garbage classification management is being implemented at home and abroad:

At present, a new trend has been formed, that is, the intelligent "ID card" RFID tag is embedded in the trash can, and tracking and operation is carried out through the intelligent supervision system.

We know that garbage, if misplaced or misclassified, is difficult to recycle resources. It is very easy to cause secondary pollution. It is a very important part of urban management.

In the new application, the installation of RFID electronic tags on the garbage can can build a powerful system and perfectly solve this problem.

First of all, each garbage truck is installed with a vehicle-mounted fixed UHF reader and a handheld card reader, with a reading distance of 2-5 meters. Make every tag readable.

Each garbage can is installed with a label, and the only inner code within the label can be a good mark for the garbage can, which can clarify the area where the garbage can belongs, the classification, the cleaning situation and so on.

Workflow

1.When the garbage truck begins to load and unload garbage, the UHF RFID device on the vehicle will read the UHF RFID tag on the operated garbage bin.

2. After the RFID device recognizes the operation time and ID number of this garbage bin, it transmits the data to the main station server through the vehicle, indicating that the garbage can has been cleaned up, and the status of the garbage can means that it has been cleared today.

3. Within 24 hours, the status of the garbage can has been cleaned up, and it is realistically green in the operation interface of the main station system; For more than 24 hours, if the terminal server does not receive the label data of the trash can, it means that the trash can has not been cleared, and the status of the trash can is determined to be not cleared, and it has been red in the system operation interface.

This makes it possible to factually detect the waste management status in each region and better respond to and investigate the work.

So what kind of chip can be applied to this scenario?

This kind of label is installed on the trash can, outdoor work requires strong toughness, wear resistance, strong reading, service life and other characteristics.

The installation does not have to be on the surface, it can also be embedded in the handle position, and the label can still be read stably as long as it is not surrounded by metal.

ABS label (high strength, abrasion resistant)

ABS bullet label (embedded, pressure resistant)

The use of labels is not specific, the characteristics of each label are not the same, according to the needs and ideas of each unit to find the right label, for the application, in order to achieve better results.